Gauthier, M., Mazouzi, D., Reyter, D., Lestriez, B., Moreau, P., Guyomard, D. & Roue, L. (2013) A low-cost and high performance ball-milled Si-based negative electrode for high-energy Li-ion batteries. Energy Environ. Sci. 6 2145–2155.
Added by: Laurent Cournède (2016-03-10 21:23:30) |
Type de référence: Article DOI: 10.1039/c3ee41318g Numéro d'identification (ISBN etc.): 1754-5692 Clé BibTeX: Gauthier2013 Voir tous les détails bibliographiques |
Catégories: ST2E Mots-clés: alloy anodes, amorphous-silicon, anode material, Electrochemical performance, high-capacity, insertion/extraction, lithium secondary batteries, long cycle life, nanostructured silicon, storage performance Créateurs: Gauthier, Guyomard, Lestriez, Mazouzi, Moreau, Reyter, Roue Collection: Energy Environ. Sci. |
Consultations : 1/607
Indice de consultation : 4% Indice de popularité : 1% |
Résumé |
A Si-based anode with improved performance can be achieved using high-energy ball-milling as a cheap and easy process to produce Si powders prepared from a coarse-grained material. Ball-milled powders present all the advantages of nanometric Si powders, but not the drawbacks. Milled powders are nanostructured with micrometric agglomerates (median size similar to 10 mu m), made of submicrometric cold-welded particles with a crystallite size of similar to 10 nm. The micrometric particle size provides handling and non-toxicity advantages compared to nanometric powders, as well as four times higher tap density. The nanostructuration is assumed to provide a shortened Li+ diffusion path, a fast Li+ diffusion path along grain boundaries and a smoother phase transition upon cycling. Compared to non-milled 1-5 mu m powders, the improved performance of nanostructured milled Si powders is linked to a strong lowering of particle disconnection at each charge, while the irreversibility due to SEI formation remains unchanged. An electrode prepared in acidic conditions with the CMC binder achieves 600 cycles at more than 1170 mA h per gram of the milled Si-based electrode, in an electrolyte containing FEC/VC SEI-forming additives, with a coulombic efficiency above 99\%, compared to less than 100 cycles at the same capacity for an electrode containing nanometric Si powder.
Added by: Laurent Cournède |